All Products
WW2 Tanks
FeaturedOnly 3 left!WW2 Tanks
M3 Grant Tank
3D printed WW2 M3 Grant medium tank — wargaming scale
Only 3 left!WW2 Tanks
Churchill Tank
3D printed WW2 Churchill Infantry Tank Mk IV — wargaming scale
Only 3 left!WW2 Tanks
Panther Tank
3D printed WW2 Panzer V Panther tank — wargaming scale
Only 3 left!WW2 Tanks
Panzer 3 Tank
3D printed WW2 Panzer III tank — wargaming scale
Only 3 left!WW2 Tanks
Sherman 75 Tank
3D printed WW2 M4 Sherman 75mm tank — wargaming scale
Only 3 left!WW2 Tanks
Sherman Firefly
3D printed WW2 Sherman Firefly tank — wargaming scale
Only 3 left!WW2 Tanks
Panzer 4 Tank
3D printed WW2 Panzer IV tank — wargaming scale
Only 3 left!WW2 Tanks
Tiger 2 Tank
3D printed WW2 King Tiger tank — wargaming scale
FeaturedOnly 3 left!WW2 Tanks
Jumbo Sherman Tank
3D printed WW2 M4A3E2 Jumbo Sherman — wargaming scale
Only 3 left!WW2 Tanks
StuG 3 Tank Destroyer
3D printed WW2 StuG III assault gun — wargaming scale
FeaturedOnly 3 left!WW2 Tanks
Tiger 1 Tank
3D printed WW2 Tiger I tank — wargaming scale
🎁 Bundles
BundleBundle Deal
North Africa German battle pack
This is a 3D printed North Africa German Armor Pack, featuring 7 models representing the core of Rommel's feared Afrika Korps armored force during the North Africa campaign of 1941–1943. The Panzer III was the primary German medium tank at the outset of the North Africa campaign, armed initially with a 50mm gun and designed for fast, aggressive armored thrusts — it formed the backbone of the Afrika Korps during the early desert battles and proved a capable opponent against Allied armor of the period, though it was increasingly outclassed as the war progressed. The Panzer IV served alongside the Panzer III as Germany's heavier medium tank option, and in its later upgunned variants featuring the long-barreled 75mm KwK 40, it became the most capable German tank in the theater, able to engage Allied armor at range with devastating effect across the open desert terrain. The 88mm FlaK gun was one of the most feared weapons of the entire North Africa campaign — originally an anti-aircraft weapon, Rommel famously used it in an anti-tank role, luring Allied tanks into carefully prepared killing grounds where the 88s would devastate them at ranges far beyond what Allied tank guns could effectively return fire. This pack is perfectly suited for mid-war North Africa scenarios and gives you a hard-hitting, historically accurate German force ready for the tabletop — ideal for Bolt Action and Flames of War Afrika Korps lists. Printed in PLA+ on a Bambu A1 with fine detail across all models. Ships unpainted.
Save 10% · $42.50
BundleBundle Deal
American battle pack
This is a 3D printed American Battle Pack, featuring 10 models representing the core of American armored power during the later stages of the Second World War. The M4 Sherman was the backbone of American armored operations — reliable, easy to maintain, and produced in extraordinary numbers exceeding 49,000 units, it saw action across North Africa, Italy, and Northwestern Europe and while often outgunned by heavier German tanks, its availability and mechanical dependability made it a war-winning weapon in the hands of aggressive American commanders. The M4A3E2 "Jumbo" Sherman was a heavily armored assault variant developed specifically for breaching fortified positions and leading advances through heavily defended terrain — featuring significantly thickened armor on the hull and turret, it could absorb punishment that would destroy a standard Sherman, and crews competed for the chance to serve in one despite the reduction in speed. This pack is ideal for late-war Western Front scenarios, giving you a powerful and historically accurate American armored force straight out of the box — perfect for Bolt Action and Flames of War US lists. Printed in PLA+ on a Bambu A1 with fine detail across all models. Ships unpainted.
Save 10% · $68.00
BundleBundle Deal
British battle pack
This is a 3D printed British Battle Pack, featuring 8 models representing the strength and versatility of British Commonwealth armored forces during the later stages of the Second World War. The Churchill was Britain's premier infantry support tank, a heavily armored behemoth designed to absorb punishment and cross difficult terrain that would stop lighter vehicles — its thick armor made it one of the most resilient tanks of the entire war and it served with distinction from North Africa through to the final campaigns in Northwest Europe, earning a reputation as a reliable and hard-hitting workhorse of the Royal Armoured Corps. The M4 Sherman 75 formed the numerical backbone of British armored units, provided through the Lend-Lease program and fielded in large numbers across every theater — reliable, easy to maintain, and available in vast quantities, it gave British commanders the armored mass needed to sustain offensive operations even in the face of heavy losses. The Sherman Firefly was Britain's answer to the problem of German heavy armor — a standard Sherman hull re-armed with the devastating 17-pounder anti-tank gun, it was the only Allied tank in Normandy capable of reliably destroying a Tiger or Panther at combat range, making it a priority target for German tank crews and a prized asset for British and Commonwealth commanders. This pack is ideal for late-war Northwest Europe scenarios, giving you a well-rounded and historically accurate British Commonwealth force straight out of the box — perfect for Bolt Action and Flames of War British lists. Printed in PLA+ on a Bambu A1 with fine detail across all models. Ships unpainted.
Save 10% · $53.75
BundleBundle Deal
North Africa Allied battle pack
This is a 3D printed North Africa Allied Battle Pack, featuring 8 models representing the Allied armored forces that fought across the deserts of Libya and Egypt during some of the most iconic campaigns of the Second World War. The M3 Grant was a critical stopgap tank that arrived in North Africa at a desperate time for British Commonwealth forces — its sponson-mounted 75mm gun gave Allied crews a weapon capable of engaging German armor and anti-tank guns at range for the first time in the theater, and despite its high silhouette and mechanical quirks it was welcomed enthusiastically by crews who had previously been outgunned by Rommel's Afrika Korps, serving with distinction at battles including Gazala and Alam Halfa. The M4 Sherman 75 arrived in North Africa in late 1942 and immediately shifted the balance of armored power in the theater — more reliable, better armed, and lower profile than the Grant it increasingly replaced, it gave Allied commanders a tank that could take on German armor on far more equal terms and proved instrumental in the final destruction of Axis forces in Tunisia in May 1943. This pack is ideal for mid-war North Africa scenarios and provides a historically accurate Allied armored force that captures the transition from early to mid-war Allied armor — perfect for Bolt Action and Flames of War British and US lists. Printed in PLA+ on a Bambu A1 with fine detail across all models. Ships unpainted.
Save 10% · $54.50
BundleBundle Deal
German battle pack
This is a 3D printed German Battle Pack, featuring 11 models representing German armored power on the Western and Eastern Fronts. The Tiger II, also known as the King Tiger, was the heaviest and most powerful production tank of the entire war — its 88mm KwK 43 gun could destroy any Allied or Soviet tank at combat ranges while its thick sloped armor made it nearly impervious to return fire, though its immense weight of nearly 70 tons made it mechanically demanding. The Tiger I was one of the most feared tanks of the war, its combination of heavy armor and the devastating 88mm gun giving Allied crews serious pause — though produced in relatively small numbers, its psychological impact on the battlefield far outweighed its actual presence. The Panther was Germany's most balanced late-war tank, developed in direct response to the Soviet T-34 and featuring excellent sloped armor and a high-velocity 75mm gun that made it a deadly opponent at long range, widely considered by many historians to be the finest all-around tank of the Second World War. The StuG III was Germany's most produced armored fighting vehicle of the war, a low-profile turretless tank destroyer that proved extraordinarily cost-effective — its powerful gun and small silhouette made it exceptionally difficult to engage while it racked up an enormous number of Allied tank kills across every front. The Panzer IV was the backbone of German armored divisions from the first day of the war to the last, continuously upgraded and upgunned to remain competitive, and in its long-barreled 75mm variants it remained a formidable and reliable fighting vehicle through to 1945. The 88mm FlaK gun anchored German defensive lines throughout the war, capable of destroying any Allied tank at extreme range and providing a devastating combined-arms element that forced Allied commanders to approach with extreme caution. Printed in PLA+ on a Bambu A1 with fine detail across all models. Ships unpainted.
Save 10% · $70.75
BundleBundle Deal
Western front battle pack
This is a 3D printed WWII Armor Combo Pack featuring 10 models spanning both Allied and German forces from the European theater. The M4 Sherman (75mm) was the backbone of Allied armored operations — a reliable, mass-produced medium tank that saw action across North Africa, Italy, and Northwestern Europe. Armed with a 75mm gun and protected by sloped armor, it was produced in staggering numbers exceeding 49,000 units. The M4A3E2 "Jumbo" Sherman was a heavily armored assault variant developed for breaching fortified positions, featuring significantly thickened armor on the hull and turret at the cost of speed — crews valued it greatly for the protection it offered in close-quarters fighting. The Panzer IV was Germany's workhorse medium tank, continuously upgraded throughout the war with longer, high-velocity guns and side skirts to counter Allied anti-tank weapons, serving on every major German front from 1939 to 1945. The StuG III began life as an infantry support vehicle but evolved into one of Germany's most effective tank destroyers, its low profile and powerful gun making it a deadly and cost-efficient weapon that accounted for more Allied tank kills than almost any other German vehicle. The 88mm FlaK gun was originally designed as an anti-aircraft weapon but became infamous as a devastating anti-tank gun capable of knocking out virtually any Allied tank at long range — feared universally by Allied crews throughout the war. The Panther was Germany's response to the Soviet T-34, featuring sloped armor and a long 75mm gun that made it one of the most formidable tanks of the entire conflict, though it was hampered by mechanical unreliability early in its service life. This pack is ideally suited for late-war Western Front scenarios and provides a balanced, competitive force split for two players straight out of the box — perfect for Bolt Action and Flames of War. Printed in PLA+ on a Bambu A1 with fine detail across all models. Ships unpainted.
Save 10% · $65.25
Star Sellers
Our most popular WW2 miniatures
What Customers Are Saying
"A hard to find version of the Panther — very happy with the purchase."
— Kevin
"Great price and great quality, I will definitely purchase from this seller again!"
— SMOKEZY
"Extremely well made, came very quickly and looks great."
— Scott
"Great print. Very detailed. The item was shipped quickly and packaged with care. Thanks!"
— Andre
"A+ Excellent 3D printed Panzer IV Tank made with great attention to detail. What stands out the most about this seller are his prices. For 1/72 scale, these prices are the best I've seen across multiple selling platforms and countries. Items were sent quickly and securely and I highly recommend this seller."
— Daniel
"I bought this for my boyfriend because he loves tanks and anything WW2 related. He loved it."
— Rose
"A well made 3D printed item. An excellent addition to my 761 Tank battalion collection."
— Steve Huff
"Outstanding — exactly what I ordered, way better quality than I expected."
— Nathan
"Nice ultra detailed print. Great communication by seller. The item shipped and arrived fast and was packaged with care."
— Andre
About 3D Printing by Jackson
Hey, I'm Jackson. I got into 3D printing a couple years ago and honestly never looked back — there's something really satisfying about designing something and holding the finished piece an hour later. I print everything on a Bambu Labs A1, which is really fast and very accurate for the price.
Everything in the shop is printed to order, so nothing sits in a box collecting dust. If you want a specific scale, have a custom request, or just want to ask something, shoot me a message — I'm pretty quick to respond.
—
Orders Shipped
5.00★
Avg. Rating
9
Reviews
USPS
Trusted Carrier
Enjoying the shop? Spread the word.